Im running an AMD Athlon XP on an MSI KT6-DeltaFIS2R motherboard, with 2x256MB sticks of Kingston HyperX DDR 3200 400MHz RAM. When I first assembled the system lasty year, I could not get it to recognize both sticks of RAM. After toying with it extensivly, got the system to run properly, and all was well. Unfortunatly, I had to take the RAM out recently, and try as I might I cant get it to recognize both sticks.
Also, the ram must be seated just right(read: about 0.05 degrees off perpendicular) in the slots for it to even boot on one stick. I have updated the bios, but no luck.

Any Ideas??